Washing my meat thermometer - part II

Posted: May 2nd, 2007 - 7:24pm by Amy Hubbell



Not quite satisfied with my inability to get a quick answer to my meat thermometer quandary, I did a Google search on “Food Safety Question.”  “Ask Karen” popped up as the first hit.  She’s the FSIS virtual representative for USDA.  I typed in my question, “Do I need to wash my digital meat thermometer or is this bad for the mechanism?”  This is what Karen said:
Thermometers are devices that measure temperatures. Using a food thermometer is the only reliable way to ensure the safety of meat, poultry and egg products. To be safe, these foods must be cooked to an internal temperature high enought [sic] to destroy any harmful microorganisms that may be in the food.

    * Are food thermometers best for large cuts of meat?
    * Can oven-safe bimetallic coil thermometers be used in the oven?
    * How accurate do thermometers need to be?
    * How many people use a food thermometer?
    * How to use a food thermometer?
    * Can I use a people thermometer for meat and poultry?
    * What are deep fry thermometers?
    * What is a bimetallic coil thermometer?
    * What is a liquid-filled thermometer?
    * What is a pop up timer?
    * What is a refrigerator thermometer?
    * What is a T-Stick?
    * What is a thermistor thermometer?
    * What is a thermocouple thermometer?
    * What is a thermometer fork?
    * What is an instant-read thermometer?
    * What is an oven cord thermometer?
    * What is an oven thermometer?
    * What is the proper way to clean a food thermometer?
    * What percentage of Americans own food thermometers?
    * What types of kitchen thermometers are available?
    * Where can I buy a food thermometer?
    * Why is it so important that people use a food thermometer when cooking meat, poultry, and eggs?
If I were anyone else, I would have given up with this huge list of questions.  But being the inquisitive (stubborn) nerd that I am, I searched through and clicked on “What is the proper way to clean a food thermometer?”  Karen says, “As with any cooking utensil, food thermometers should be washed with hot soapy water. Most thermometers should not be immersed in water. Wash carefully by hand.”

Karen’s advice sounds … sound.  But it isn’t really practical if I’m cooking two things on the grill at once.  Will the internal temperatures get hot enough to kill the microbes on the metal if I probe another piece of meat?  I’m certainly no scientist, but I wonder what the real cross-contamination risks are.  I also wondered if another source would give me a different answer. 

Next I Googled, “Wash meat thermometer” (in quotes) and I got exactly one result-- a document entitled “FY 2001 Annual Report of Accomplishments and Results: Oklahoma Cooperative Extension Service.” This report, comprised of many project overviews, provided one on “Quick & Easy Cooking Schools.”  In this project pilot cooking schools were offered in two Oklahoma counties, one of which had a 159% higher rate of foodborne illness than the rest of the state and this was 219% higher than the rest of the U.S. Using a 70 page Quick & Easy Cooking School curriculum, thirty cooking schools were taught in 2000.  As a result, the worst county (Washita) dropped from 159% above the state rate to 100% below the state rate for foodborne illnesses.  Here are some other “anecdotal” results:

“In addition, there was an increase in the number who used a meat thermometer after attending the cooking school.  Moreover, the following are samples of additional food safety comments from participants regarding what they learned:  ‘Wash meat thermometer in-between insertions.  Do not just rinse the grilling tray that held raw meat but wash it before putting cooked meat back on it.  Do not thaw meat on the counter.’”
 
My friends at iFSN also found the following references for me:

From the Beef Information Centre “Thermometer Know-How” states, “Always use hot soapy water to wash the tongs, plate and thermometer stem used in checking partially cooked meats before using again.”

From the food safety network’s own page, Cooking Temperatures  06.jul.05, “Wash the thermometer stem in hot soapy water every time you use it.” 

The explanation that finally cured my curiosity was this one from O. Peter Snyder Jr.  His study, “FOODBORNE ILLNESS HAZARD CONTROL STRATEGIES FOR CHURCHES AND NON-REGULATED GROUP FEEDING SITUATIONS” in 1992 for the Hospitality Institute of Technology and Management (May 1998 edition) explains that while cooking large pieces of meat, “Do not roast meats, etc. on a spit or stick the meat with a fork, because it will unnecessarily contaminate the center of the food. Always wash the stem of a thermometer before putting it into cooked, ready-to-eat food.” 

Now on to investigating how many people use a fork when they grill.
Your rating: None (4 votes)
Bookmark and Share

Comments

Carol McInnes says:

As an Environmental Health Specialist who inspects retail food facilities I have had this discussion before with my co-workers and operators. We detail the public health significance of the wash-rinse-sanitize steps for their utensils, then turn around and use our alcohol swabs alone to clean our thermometer stems. I am still unclear as to why we do not have to wash, rinse, then sanitize our thermometers, except that it is impractical. Is there any research out there that indicates that the use of alcohol swabs alone is sufficient to prevent contamination of the foods we temp?

Posted on May 4th, 2007 - 9:46am

Amy Hubbell says:

Carol,Since I'm a French professor, I put the iFSN team on your question which was recognized to be a good and hard one to answer. One of the responses came from Pete Snyder's article, "HOW EFFECTIVE AND NECESSARY ARE SANITIZING SOLUTIONS IN RETAIL FOOD OPERATIONS?" found at http://www.hi-tm.com/Documents/Sanit-sol.html"In summary, we have a critical situation regarding the food code in that the industry, historically, has believed that the food code provides scientific fact, when it has actually been written with little scientific validity for many requirements, to include all of the sanitizing requirements. Soap and water do all of the work in terms of removing bacteria--not chlorine / quat sanitizers. FDA personnel have specifically said that they understand this, but they like sanitizers, because they provide an 'insurance factor.' Actually, this takes employees' attention away from the critical control point--the detergent wash and rinse. People need to be taught that sanitizers by themselves do not make food contact surfaces safe. A soap-and-water wash and a clean-water rinse provide the necessary removal of bacteria from surfaces. If a facility wants to use sanitizer, it should not be considered a critical control procedure, but rather, a GMP (Good Manufacturing Practice), and should not be regulated at all. It should be up to the manager to decide if sanitizer is to be used."There's more information available from the U.S. Food Code Section 3.304-11 of Annex 3 (http://www.cfsan.fda.gov/~acrobat/fc05-a3.pdf) which explains why sanitation is important ... and then they also found a study entitled, "COMPARISON OF CLEANING METHODS FOR REDUCTION OF ATTACHED MICROORGANISMS FROM CONSUMER-STYLE THERMOMETERS" that recommends the best way to wash my meat thermometer was warm or hot water washing followed by wiping with a paper towel.Thanks for your question which helped me get a better answer.Amy

Posted on May 9th, 2007 - 7:19am

Brae Surgeoner says:

Amy,The full reference for the paper referred to above is:Lee, S.Y., Hillers, V.N., McCurdy, S.M., & Kang, D.H. (2004). Comparison of cleaning methods for reduction of attached microorganisms from consumer-style thermometers. Journal of Rapid Methods and Automation in Microbiology, 12, 225-33.

Posted on June 28th, 2007 - 3:40pm

Richard says:

Hey mate how are you going i just read your advise of how to clean a food thermometes, I never imagined that it could be the way, thanks anyway i needed that for my assignment

Posted on March 5th, 2009 - 2:47am

Anonymous says:

I have ruined (broken) several of the new digital thermometers after using them. I just wash off the probe with hot soapy water then rinse. If water gets into the part of the instrument where the battery is located...the thermometer is toast...it is ruined and will not work. Bob

Posted on October 11th, 2011 - 12:25am

FRED STEIN says:

I read with interest the article and all the posts. Using an alcohol swab to "clean" a digital thermometer, will not do the trick. Need water and soap. I use water and soap each time I probe, whether it is into a vegetable or a piece of meat, and then I use an alcohol swab each time before taking more temps or putting back into the sheath. I also use the alcohol swab each time I remove the probe from the sheath before probing. One additional thing that I have learned that I would like to share: remember to take the alcohol swab and get the very tip of the probe by wrapping the swab around the tip and rubbing back and forth and over the tip. Especially when probing a piece a meat, poultry, bacteria gets on the probe tip and can remain there, if this is not done, causing the next probed product to possibly be contaminated. Thank you all for your comments. I am always learning.

Posted on January 2nd, 2012 - 7:59pm

Bred says:

One thing i always do after using my meat thermometer is just using soap and warm water to clean it. I never use alcohol or other chemical liquid. It never get any health issues so far. But, I have to use alcohol to do preventive contamination.

Posted on March 31st, 2012 - 5:46pm

Beginner Guitar says:

I will use alcohol to wash meat thermometer. It's crucial to protect ourselves from contamination.

Posted on May 13th, 2012 - 11:44pm

Post new comment

The content of this field is kept private and will not be shown publicly.
CAPTCHA
This question is for testing whether you are a human visitor and to prevent automated spam submissions.